EU minimum import price preferable to 232 quotas: ISTA chair

The introduction of a minimum import price (MIP) by the European Commission in response to the US 232 tariff plan would be preferable to a quota system which “could lead to shortages in the market,” according to International Steel Trade Association (ISTA) Chairwoman Simone Jordan.

As previously reported, the European steel association (EUROFER), is pushing the Commission to respond to the threat of redirected steel, caused by the introduction of a 25% tariff in the US, by introducing a quota that would set a limit on the amount of tariff-free steel that could enter the EU.

A legal source in Brussels said this was the most likely safeguard measure to be imposed, mirroring what the EC did in 2002 in response to a similar US undertaking.

“The safeguard measures normally take the form of an import quota, which is based on the last three years average import volume. It could be broken down per country/supplier of individual products, or just per product, with a global quota which would be allocated on a first-come, first-served basis,” the source said.

Other existing anti-dumping and countervailing duties would remain in force within the quotas, he said. “[They] will be combined in a way in order to avoid double application once the quotas have been exhausted and safeguard duties become applicable,” the source said.

Jordan, however, said a quota would allow only limited volumes from countries that recently increased their market share. “The EU already has all imports of steel under surveillance, so we feel that imposing quotas at this stage would be time consuming and possibly unnecessary,” she said. “With current AD measures in place, quotas could lead to shortages in the market.”

Jordan noted that a 25% tariff might not be high enough to block imports should US domestic markets continue their sharp rise. “We are still awaiting finite measures from [the] US government… [but] if the EU feels it needs to protect its market, the simplest interim measure pending safeguarding would be a reviewable product-by-product minimum import price.”

Peter Brennan, PLATTS

EC clears joint acquisition of CSM by ArcelorMittal, CLN

The European Commission has approved the joint control acquisition of Centro Servizi Metalli (CSM) by Coils Lamiere Nastri (CLN) and ArcelorMittal.

CSM and ArcelorMittal are active in the distribution of stainless steel quarto plates through oxy-cutting centers, while ArcelorMittal is also a producer of these goods.

It is understood that ArcelorMittal CLN will get 42.39% of CSM’s shares, while ArcelorMittal’s wholly-owned subsidiary Industeel will own 49%, although the discussion is still ongoing as the closing has not been concluded. It is likely that will be concluded by April.

Industeel already owns 21.01% of CSM sinc6e 2013. CSM was previously controlled by the Slovenian Steel Group after it acquired controlling shares from Quarto Fin in 2012, which remained a stakeholder.

CSM has three production units in Italy (Reggio Emilia), Poland (Gliwice) and France (Lyon). The group also has two sales offices in Germany and one in Benelux.

Annalisa Villa, PLATTS

EC reviews expiry for duties on Chinese coated sheet

The European Commission has initiated expiry reviews for anti-dumping and countervailing measures on organic-coated sheet imports from China following a request from European steel federation, Eurofer, in December, the EC said Wednesday.

According to the EC’s Official Journal, Eurofer alleges the EU steel industry “has not yet fully recovered and remains vulnerable to continuation of injury should the measures be allowed to lapse.” The EC said Eurofer showed evidence that in absence of AD duties, imports would likely increase due to “unused capacity” in China and “the attractiveness of the [European] Union in terms of volume” and “the existence of trade defense measures in other third countries.”

The EU’s investigation will cover the period of January 1-December 31, 2017 to determine whether the measures will stay in place or be lifted. During the expiry review, the EU will analyze exports to the EU in the investigation period and consider whether subsidised exports would likely continue or recur if measures expire.

Duties currently in force against Chinese organic-coated sheet are 5.9-26.1% (according to company) for dumping and 13.7-44.7% for countervailing.

The EC has until March 2019 to decide. The measures remain in place until then. If the EC would not have initiated a review, the AD and countervailing duties would have expired March 16.

Laura Varriale, PLATTS

EUROMETAL Regional Meeting Central Europe in Vienna 14-15 May 2018

Dear members and colleagues,

please find the flyer inviting to EUROMETAL Regional Meeting Central Europe in Vienna.

Theme of the conference: How can Steel Distributors and SSC enhance the value chain of Steel?

May we draw also your attention to the sponsoring packages included in the flyer.

[ Agenda and Registration ]

[ Hotel Reservation Form ] 

 

Silver Sponsors

 

 

 

Sr Ignacio Candel collaboration with Steelinvest Group

Steelinvest Group is delighted to announce that an agreement has been reached with Sr Ignacio Candel for the services of his company, Steel Trade Advisors Madrid, to further develop their business strategy and activity in the Iberian Peninsula.  Steelinvest also looks forward to Sr Candel’s contribution to the Group’s wider growth. This agreement commences as of 20th March 2018.

Sr Candel, before establishing his advisory company, was CEO of Plafesa Group in Spain overseeing its rapid development in that role during the difficult economic period since 2010.  His experience over 30 years in the steel sector together with his qualifications both in the legal sector from Universidad Complutense de Madrid and business administration from IESE, Spain adds enormous value to developing the strategy of the Steelinvest Group in the region and on a global level.

Established in 2002, Steelinvest is an international steel trading group, operating from 14 offices worldwide.  Its product expertise includes both flat and long steel products, as well as raw materials related to the steel making process.

Klöckner lifts earnings, launches e-commerce platform

Germany’s Klöckner & Co raised both its revenues and operating income in the fiscal year 2017, Kallanish hears from the steel distribution group. The increases were especially due to the positive trend in prices as well as to internal optimisation measures, Klöckner says.

For its key markets, the group expects that real steel demand will rise by 1-2% in Europe and by about 3% in the USA in 2018. “If the current trend toward higher steel prices were to persist, this would have an additional positive impact on operating income,” it notes.

2017 saw Klöckner further accelerate its digital transformation. The share of sales generated via digital channels was raised from 13% to 18% as a result. As of the end of last year, the group is expanding its online shops into marketplaces by opening them up to providers of complementary products. The first version of the industry platform, also open to direct competitors, has gone live under the name of XOM.

In September, ceo Gisbert Rühl had announced the launch of XOM as a tool-for-all, to create “… one’s own shop-in-shop,” and in which Klöckner intends to hold only a minority stake in the long run. In that context, he said that digital tools will help to predict demand situations: “Allegedly, Facebook knows two weeks ahead of time if a couple separates,” Rühl said in a presentation monitored by Kallanish.

The distributor raised its revenues by 10% to €6.3 billion ($7.7 billion) year-on-year in fiscal year 2017 on virtually stable shipments of 6.1 million tonnes. Operating income rose by 12% to €220 million and net income improved from €38m to €102m, same basis.

Trump’s threat to EU auto exporters spooks steelmakers

A number of tier-1 European steelmakers are increasingly more concerned about potential tariffs for European cars sold into the US than the direct tariffs on steel under the country’s Section 232 plan, mill sources said Thursday.

The US is the largest export market for an industry that produced 19.2 million vehicles in 2016, according to figures published by the European Automobile Manufacturers Association (ACEA).

US President Donald Trump has been a vocal critic of the trade deficit the US has with European automakers and has warned of a “tax on their cars.” Such a move would be a significant threat to a trade flow that saw the US import 1.17 million EU-made passenger cars in 2016.

A source at a German steel mill said the concern for the automotive sector is far greater than the potential lost steel exports to the US. “Our concern is if this escalates and goes into cars — 25% of German cars go into the US market,” the source said.

The automotive production hub in Europe is in Germany, with numerous service centers almost entirely focused on supplying the sector. In 2016, Germany produced more than 5.5 million passenger cars, with a further 550,000 commercial vehicles. ThyssenKrupp, ArcelorMittal and Salzgitter are major domestic automotive steel suppliers, with significant long-term contracts dependent on the success of the industry.

“If we start a real trade war between Europe, [the] US, China, whoever, this could affect the steel demand and this is a much worse scenario,” another European mill source said, noting that the European Commission has escalated tensions by proposing retaliatory measures for Harley Davison motorcycles and American whiskey.

The European hot-dip galvanized market has been reshaped in recent years to tailor to automotive grades, to the extent that many industrial-grade buyers are concerned by limited supply options. But a trade war with the US would cause significant problems for a key end-user industry that already faces headwinds.

ACEA forecasts new car sales in the EU to slow to 1% growth in 2018, following growth of 3.4% in 2017, when vehicle sales totaled more than 15 million for the first time since 2007.

EU legislation bringing forward CO2 targets for cars and vans, plus the potential disruption from Brexit, have dampened the overall outlook. ACEA Secretary General Erik Jonnaert is keen to avoid further obstacles, calling this week for international trade rules to be respected.

“European manufacturers do not only import vehicles into the US, but that they have a major manufacturing footprint there, providing significant local employment and generating tax revenue. Indeed, some European manufacturers have their biggest plants not in the EU, but in the US,” Jonnaert said.

Peter Brennan, PLATTS

EU exporters expect US trade to continue despite tariff plan

The 25% tariff on European steel exports to the US will have limited impact, as many products cannot be easily replaced domestically, sources said Thursday.

The US imported 3.2 million mt of finished steel products from the European Union in 2017, making it the region’s second-largest export destination after Turkey.

The most exported product was tinplate, a product not easy to replace from local sources in the US as suppliers are limited. Tata Steel is the largest source of foreign tinplate, selling 272,000 mt in 2017 primarily to packaging companies. Sources suggested Tata supplies drawing-quality grades that can save can-makers around five cents per can, while US producers have largely moved out of the product sector in recent years.

Steelmakers also pointed to the US automotive sector, which imports a large proportion of the 1.2 million mt of coils sold into the US last year. “Our customers are realizing that this will be a big problem for auto, indirect auto, engineering high-strength wide steel and packaging steel customers. They are all completely reliant on Europeans,” one mill source said.

Another mill source said that even where the grades are produced in the US, end-users may struggle to acquire the volume they require from the domestic market. “A lot of the US grades they make, they are already at maximum capacity,” the source said.

A third mill source noted the limited impact on European sales to the US after President George W Bush implemented Section 201 tariffs in the early 2000s. “Last time there was a tariff, Europeans just said ‘Sorry, the price is increasing by the tariff,’ and nothing happened,” he said.

The impact is expected to be more serious for long steelmakers, with the likes of Megasa in Portugal sharply increasing their US-bound sales of rebar to 145,000 mt in 2017. Sources said commodity-grade products such as these are likely to be unworkable with a 25% tariff.

But the biggest concern for most is the likely redirection of trade from the US. “It’s plain and simple, only in flat products there is 12 million mt shipped to the US, of which eight million is non NAFTA … that could be coming to Europe from tomorrow,” one mill source said.

Peter Brennan, PLATTS

Trump signs off on steel tariffs; Canada, Mexico excluded

US President Donald Trump on Thursday signed off on two proclamations instituting his administration’s previously announced tariffs on steel and aluminum imports.

As a result, the US will implement a 25% tariff on imports of steel and a 10% tariff on imports of aluminum, which will take effect March 23, 15 days from the date of the signings. Canada and Mexico will be excluded from the initial tariffs and the proclamations include a broader provision which will allow other countries to request an exemption, a senior administration official said Thursday in a media briefing ahead of the signing.

“[The tariffs] will cover all of the countries that ship us steel and aluminum products…however importantly for now, Canada and Mexico will be excluded from the tariffs and we will have ongoing discussions with Canada and Mexico about our security relationship,” the administration official said. “NAFTA discussions will be part of that, only because NAFTA is an important part of the security relationship in the hemisphere.”

No timeline was provided for when Canada and Mexico’s exemptions may lapse.

“All countries will be welcome to discuss with the US alternative ways to address the threat and impairment of the national secretary caused by their imports,” the administration official said.

Discussions with other countries regarding potential exemptions will take place with United States Trade Representative Robert Lighthizer, the administration official said. Should countries secure exemptions, the US will raise tariffs on everyone else modestly, he said.

“Should the president decide there is a satisfactory alternative means to address the threat…this administration has the ability to flexibly modify the order in a way which will preserve our national security,” he said.

The 10% and 25% blanket tariff levels have been set to ensure a healthy steel and aluminum industry that allows US producers to earn reasonable rates of return, the administration official said. In order to do that, steel and aluminum producers have to achieve a sufficient level of capacity utilization, he said. The administration has said its goal is to get steel and aluminum capacity utilization up to 80% each.

Following a nine-month investigation into the effect of steel imports on national security, the Department of Commerce delivered its Section 232 report and recommendations to Trump January 11. A global tariff of at least 24% on all steel imports from all countries was one of three recommendations presented by Commerce in its report, however the administration decided to impose a tariff of 25% on steel based on additional data and analysis by Commerce following delivery of the initial report, the administration official said.

Justine Coyne, PLATTS

German stocks rise again in January, sales up heavily

German stockholders started to increase stocks in January, but historical figures show they are catching up from a very low level, while sales grew heavily from December to January, latest figures from German stockholders’ association BDS showed.

January saw the usual seasonal uptick at stockholders in Germany, but sales saw a big jump — particularly for flat steel products, which rose 71.6% month-on-month to 627,939 mt as prices started to rise, while long products rose by 51.8% to 272,280 mt.

Flat steel products grew by 14.6% from December to January to 1.46 million mt, while long products saw an increase of 8.7% to 865,472 mt.

Compared to volumes of stock in January last year, levels remained largely stable for both long and flat products in year-on-year comparison. Sales went up by 9.1% on-year for flat products and 7.9% for long products in January.

As previously reported, stock levels decreased to their lowest levels in years in December last year. Sources noted this did not necessarily mean stockists did not have material available as a large number of distributors have warehouses at ports in the Benelux or strategic partnerships with mills and those volumes are not recorded in the BDS data.

Laura Varriale, PLATTS