Salzgitter Trading unit turns profit amid group losses in H1 2025
In the first half of 2025, Salzgitter AG’s Trading business unit achieved a turnaround with a marginally positive result, thanks to cost adjustments and restructuring measures, the company states.
It is less happy with the results of its Steel Production and Steel Processing business units, which it says reflected the extremely challenging political and economic conditions, Kallanish notes.
In the first six months, Salzgitter group recorded external sales of €4.7 billion ($5.5 billion), down year-on-year from €5.2 billion. Earnings before taxes amounted to negative €83.8 million, compared to positive €11.5m in H1 2024.
On the basis of preliminary results published in July, the company had already adjusted its guidance downward. It now anticipates revenue of €9-9.5 billion for the full year, down from the previous forecast of €9.5-10 billion. In terms of pre-tax result, it envisages a range between a loss of €100m and breaking even. Previously, it forecast a range of €–100m and €+100m.
The Trading unit, which encompasses stockholding distribution as well as international trading, saw earnings turn from a loss to a profit. Ongoing cost savings combined with restructuring measures brought the pre-tax result to a positive €10.9m, after a loss of €0.8m in the first half of 2024.
One-off effects included the sale of subsidiaries in Austria and in pipes distribution. Compared with the year-earlier period, the unit’s shipments declined marginally from 1.74 million tonnes to 1.68mt. Sales of stockholding steel trade, in particular, dropped considerably below last year, the company notes, without giving tonnages.
Christian Koehl Germany
Tata Steel UK CEO Rajesh Nair appointed UK Steel chair
Tata Steel UK says its chief executive, Rajesh Nair, has been appointed the new chair of producer association UK Steel, Kallanish learns.
Nair has more than 36 years of experience across the Tata Steel Group and is a board member of Tata Steel UK. He joined the UK steelmaker as chief operating officer in 2021, before becoming ceo in 2023.
He will undertake his role as chair in addition to his existing responsibilities at the steelmaker.
Nair says: “It is an honour to be appointed chair of UK Steel at such a pivotal moment for the industry. This is a period of profound change – with significant challenges, but also real opportunities to strengthen the sector for the long term.”
“I look forward to working with UK Steel members and stakeholders to help secure that future – working closely with Government on its Steel Strategy and addressing structural issues like uncompetitive energy costs and the growing threat of high-emission imports,” he adds.
The steelmaker is currently undergoing a £1.25 billion ($1.67 billion) transformation at its site in Port Talbot, building an electric arc furnace (see Kallanish passim).
UK Steel director general Gareth Stace notes: “The appointment of Rajesh as chair of UK Steel is excellent news for both UK Steel and our industry as a whole. Rajesh will bring a wealth of experience across both the global and UK steel industry to this role. His appointment could not have come at a better time as our industry looks to modernise and grow as Government prepares to publish its Steel Strategy this autumn.”
Carrie Bone UK
Germany’s steel and metal industry sounds the alarm! Production decline, political action needed
The steel and metal processing industry, a backbone of German manufacturing, experienced a challenging start to 2025. Production fell 3.4% year-on-year in the first six months. A temporary 2.4% recovery from May to June was insufficient to offset the decline. Furthermore, the weak order growth seen earlier in the year turned negative again by June.
The German Steel and Metal Processing Association (WSM) described the contraction as a “braking effect” and warned that the current situation could lead to structural erosion in the industry. The association is calling for bold political steps: “It’s time for driving force instead of stagnation – we need a hot autumn filled with courageous political decisions.”
High energy costs and weak infrastructure are bottlenecks
According to WSM, the production decline stems from long-standing structural problems in Germany that require urgent solutions:
- High energy prices and taxes
- Heavy bureaucracy and slow permitting processes
- Insufficient investment incentives
- Weak infrastructure
These factors seriously hamper the daily operations and future projects of about 5,000 medium-sized companies affiliated with the association. WSM CEO Christian Vietmeyer noted, “We must change these conditions that block the courage needed for innovation, investment, and transformation. Coalition partners need to act together and make overdue decisions.”
Additionally, new U.S. tariffs add further pressure on the sector, posing another obstacle to growth.
Removal of the Gasspeicherumlage is a first step, but not enough
WSM welcomed the removal of the natural gas storage surcharge (Gasspeicherumlage) as a positive development but stressed it alone is not sufficient. Holger Ade, Head of Industry and Energy Policy at WSM, stated: “High grid usage fees must also be lowered. Moreover, a special and affordable industrial electricity tariff should be introduced for all manufacturing companies. Without this, small and medium-sized enterprises cannot switch to energy-dependent transformation technologies.”
No more delays
Christian Vietmeyer emphasized that the industry is ready to invest in sustainable production but needs clear pathways: “There is an urgent need for digitalized and accelerated permit processes. Companies want to invest but require incentives, reliable legal frameworks, and stable conditions.”
WSM’s message is clear: Germany’s industrial production base is under threat. Medium-sized companies now expect swift and effective political actions to maintain competitiveness. The association urges political leaders: “Let’s act together without wasting time on debates. The shared goal must be growth. The time for delays is over.”
European HRC prices down slightly on sluggish demand
European hot-rolled coil steel prices fell slightly on Wednesday August 13, with prices still below target offers, sources told Fastmarkets.
Mills were trying to raise their October offer prices, sources said, looking to achieve prices of around €590-610 per tonne ex-works.
But market participants estimated the workable level for HRC at about €560-570 per tonne ex-works on Wednesday.
Factors still having an impact on liquidity include the current summer holiday slowdown and European mills awaiting new regulatory changes, due to be implemented in early 2026, sources said.
“Integrated mills are trying to push [for higher] offers for the third quarter of the year, but I haven’t seen any willingness to buy at those [higher] prices,” a distributor source told Fastmarkets.
“Mills are looking to see what will happen with imports when the EU Carbon Border Adjustment Mechanism] (CBAM) comes into effect in January, especially in terms of imports from China,” the source addedd.
Fastmarkets’ calculation of the daily steel HRC index, domestic, exw Northern Europe was €569.33 per tonne on August 13, down by €1.68 per tonne from €571.01 per tonne on August 12.
The Northern European index was up by €1.83 per tonne week on week and by €23.08 per tonne month on month.
And prices for overseas coil edged up slightly over the past week.
Fastmarkets’ weekly price assessment for steel hot-rolled coil, import, cfr main port Northern Europe, was €465-510 per tonne on Wednesday, narrowing up from €460-510 per tonne the previous week.
In Italy, meanwhile, trading activity was close to non-existent amid the ongoing holiday season.
It remains to be seen whether target offers of €540-550 per tonne ex-works from local suppliers at the end of July – ahead of summer closures – will be sealed in deals and so far this month, buyer estimates of achievable prices varied between €520 per tonne and €540 per tonne ex-works.
Some sources, however, suggested, that local suppliers might even revise their offers higher, given the price recovery in Northern Europe and the increase in imported HRC prices.
“In Italy, the holiday season is in full swing and hardly any [HRC] is being traded. We will see where the price [for HRC] stands in September,” a buyer source said.
Fastmarkets’ daily steel hot-rolled coil index, domestic, exw Italy was €536.67 per tonne on Wednesday, down by €3.33 per tonne compared with €540.00 per tonne on Tuesday.
The Italian index was, however, up by €1.67 per tonne week on week and up by €10.84 per tonne month on month.
Prices for overseas coil were also up in the week to Wednesday.
Fastmarkets’ weekly price assessment for steel hot-rolled coil, import, cfr main port Southern Europe, was €460-520 per tonne on Wednesday, narrowing up from €450-520 per tonne a week earlier.
The lower end of the range reflected bids and the latest transactions for Indonesian material, with new offers from Indonesia heard at around €470-475 per tonne CFR Italy.
The upper end of the range reflected the lowest offers from Turkey and India, meanwhile.
Overseas suppliers were able to offer end-September and early October shipment, sources told Fastmarkets.
Julia Bolotova, Davide Montagner
Global steel HRC prices hit highs
A bump in Chinese steel prices, underpinned by government production cuts, has fuelled a rally in global hot-rolled coil (HRC) prices.
This has coincided with a few other supporting factors, such as strong raw materials prices, trade measures and also regional dynamics in the EU, including reduced import supply, although demand remains fundamentally weak in many countries.
The Argus global HRC marker — a composite weighted-average index of key Argus regional HRC prices — has been on an upward trajectory so far this month, rising by $12.33/t from 1 August to $544.75/t on 12 August. According to the index, HRC prices hit bottom on 9 July, reaching $523.13/t.
The rise is primarily the result of Chinese HRC prices bottoming out, with the Argus daily fob Tianjin index reaching the bottom in this cycle at $439/t on 25 June and holding at this level until 2 July, owing to low summer steel consumption in the domestic market and weak seaborne demand.
The market lifted at the start of July because of government incentives to eliminate outdated capacities, and then again in mid-July on production cuts ahead of China’s military parade in September. In the second half of July, a large dam project in Tibet, expected to boost steel demand, propped prices further up.
Firming iron ore and coking coal prices lent support too, amid talks of restrictions to production of coal mines in China. Before the latest rebound in coking coal prices, the Argus fob Australia hard coking coal index reached bottom on 8 July, since when it has increased by $20.10/t to $153.65/t on 12 August. During the same time period, the Argus ICX® 62pc has increased by $8.50/t.
The Chinese steel price increase and the raw materials bump have played a factor in rising global offers, but in Europe reduced import supply, because of a number of trade measures, has incentivised bolder mill increases. Expectations that January supply will be even shorter, owing to the Carbon Border Adjustment Mechanism (CBAM) entering into effect, has strengthened sentiment. The Argus HRC European marker, which is an average of the ex-works northwest EU and ex-works Italy indexes, is up by €28.25/t from 15 July.
In contrast, during the summer months the Argus HRC ex-works US index has bucked the global uptrend, despite spring tariffs propping up the market previously, with the index dropping by $32.75/st between 15 July and 12 August, to yesterday settle at $857/st — its lowest since February. Strong buyer inventories, little need to restock and moderate mill lead times have weighed on prices.
Global steel HRC marker $/t
By Lora Stoyanova
Source: argusmedia.com
Coiled rebar prices climb in Austria
Last week’s announcement of new rebar size extras by some mills has been followed by increased effective rebar offers, Austrian sources reaffirm.
The size extras were amended for the first time since 2015, with some mills simultaneously raising base prices, at least for straight rebar.
Size extras for the standard thickness of 12mm were lifted by €15/tonne to €280/t ($325), with base prices lifted by the same degree. Offers are still scarce amid the summer lull, but buyer sources tell of delivered prices of €640-650/t, which suggest a base price of €360-370/t.
The picture is more opaque for coiled rebar, given each country has a specific offer system. For Austrian customers, domestic and German mills traditionally quote an effective price not differentiating between base price and size extra. “It has been habitual for as long as I’m in the business, certainly more than 20 years,” one buyer tells Kallanish.
He notes that coil offers from Italian mills – which are still going by the older size extra lists – went up by €10-20/t last week. Another buyers tells of German offers – including the newer size extras – that are €30-40/t higher than before.
The new size extra for coiled rebar of 12mm thickness is the same as for straight bar, €280. For thicker gauges, the size extra for coil can be €15 higher than for straight bar. According to the buyer, the effective offers to Austria do not differentiate much by thickness either. Therefore, the base price portion cannot really be traced back.
Regarding newer offers for straight bar from Italy, one buyer tells of increases by €10-20 since last week. For customers in southern Austria of mills near Lake Garda, a relatively short distance, this would mean base prices of around €350. Offers to other locations could easily be €15+ more, he says.
Christian Koehl Germany
German fabricators’ production stays low
Germany’s steel and metal working industries cannot be happy with their performance in the first half-year, says their federation WSM.
Production at the circa 5,000 mostly small and medium-sized fabricators in H1 was 3.4% lower than in the corresponding 2024 period, Kallanish hears from WSM. Towards the end of the first quarter, the year-on-year drop appeared to become narrower, with March down only 0.4% y-o-y. That did not turn into a trend, despite some positive signals like a 2.4% month-on-month growth from May to June.
Order intake also does not look promising.
WSM managing director Christian Vietmeyer has used the release of the figures as an occasion to once more call on policymakers to take measures. The standstill is being caused by well-known brakes on economic activity in Germany, he says, citing painful energy prices and taxes, snail-slow approval procedures, bureaucratic hurdles, lack of incentives for investment, and outdated infrastructure.
“The time of hesitation must be over,” he says with an eye on the new government, which has now been in office for 100 days – normally a cornerstone to take stock of a new government’s performance. “Small and medium-sized industries now need a ‘hot autumn’ with fast political decisions that reinforce competitiveness,” Vietmeyer asserts.
Christian Koehl Germany
Czech semis imports surge in first half
The Czech Republic saw semi-finished steel imports surge in the first half of 2025, with long steel intake falling. Imports of the largest product group – flats – inched up, Kallanish notes from GTT data.
Semis intake surged 79% on-year in H1 to 663,358t. This coincided with the resumption of some steel production on a tolling basis at the beleaguered Liberty Ostrava mill, with semis feedstock supplied by two separate companies. The plant’s blast furnace has been idled since 2023.
Ostrava was recently acquired by a consortium comprising SPV NH Ostrava and SPV NH Koksovna, companies owned by former Czech interior minister Martin Pecina. However, it is unclear whether the new investor plans to restart the blast furnace.
Plate re-roller Vitkovice Steel has meanwhile been acquired by Jindal Steel, which is eyeing installing a new electric arc furnace at the plant, which would see it produce its own slab for the first time since 2015. The Czech firm nevertheless signed a memorandum of understanding with Oman-based Jindal subsidiary Vulcan Green Steel for the future supply of 1 million tonnes/year of slab.
Czech Republic was among the countries to lobby the European Commission to continue allowing an EU quota for Russian-origin slab imports, on which it depends for flat steelmaking.
Despite the problems at Ostrava, however, Czech iron ore imports grew 2% in H1 to 1.49mt.
Czech imports of longs meanwhile inched down 1% to 858,636t. Intake of flats rose 4% to 2.1mt.
On Czech exports, shipments of longs and flats rose 6% and 9% respectively to 1.06mt and 498,221t, while semis exports surged 22% to 126,311t – despite the growth in their imports.
Adam Smith Austria
British Steel negotiations at standstill as UK rejects Jingye’s multi-million demands
According to a news report by the BBC, the UK government’s talks with China-based Jingye Group, the owner of the UK-based steelmaker British Steel, have reached a critical impasse over the Scunthorpe steelworks.
Ministers accuse Jingye of demanding “hundreds of millions” in taxpayer money to transfer ownership – a sum they say is far above the company’s real value. The deadlock has stalled efforts to secure a new buyer and raised fresh concerns about thousands of jobs and the country’s last blast furnaces.
According to a news report by the BBC, the UK government’s talks with China-based Jingye Group, the owner of the UK-based steelmaker British Steel, have reached a critical impasse over the Scunthorpe steelworks. Ministers accuse Jingye of demanding “hundreds of millions” in taxpayer money to transfer ownership – a sum they say is far above the company’s real value. The deadlock has stalled efforts to secure a new buyer and raised fresh concerns about thousands of jobs and the country’s last blast furnaces.
In April, the UK government took control of steelmaker British Steel to prevent the closure of two blast furnaces at its Scunthorpe plant, as SteelOrbis previously reported. Full nationalization was initially considered, but ministers hoped Jingye Group would transfer ownership for a nominal fee. British Steel is officially still owned by Jingye Group, as the government stopped short of a complete takeover. Full nationalization remains a last resort, with ministers wary of discouraging foreign investment.
At the end of March, British Steel started the consultation process for the closure of two blast furnaces at the Scunthorpe plant, following Jingye’s rejection of a £500 million support package offered by the UK government.
Spain’s steel production declined in June
According to data compiled by SteelRadar from the Spanish Steel Producers Association (UNESID), the country’s crude steel output fell by 6.8% month-on-month in June 2025 to 1.06 million mt. On a yearly basis, production remained unchanged.
In the January–June period, Spain’s total steel production rose by 6.8% compared to 6.19 million mt in the same period of 2024, reaching 6.61 million mt.
In June, the Spanish steel industry also experienced a decline in scrap recycling. During the month, 844,000 mt of scrap was used as raw material in the production of new steel products, marking a 9.2% drop from the previous month and a 1.4% decrease year-on-year.
In the first half of the year, the sector’s total scrap recycling amounted to 5.27 million mt.