Day: 27 April 2021

US raw steel capability utilization rose the week ended April 24, rising to 78.4% from 78% the previous week, the American Iron and Steel Institute reported April 26.

Production increased by 0.6% to 1.781 million st during the week ending April 24, up from 1.77 million st the previous week, according to the data.

Last week’s production was up 43.6% compared to the same week a year earlier, when capability utilization was at 55.4% and production totaled 1.24 million st.

Adjusted year-to-date production through April 24 totaled 28.484 million st, with a capability utilization rate of 77.2%. The total is 2.1% higher than the 27.905 million st produced during the same period last year, when the utilization rate was 73.7%.

Last week’s production totaled 166,000 st in the Northeast, 611,000 st in the Great Lakes region, 189,000 st in the Midwest, 744,000 st in the Southern district and 71,000 st in the Western region.

The tonnage data is estimated, compiled from weekly production data provided by 50% of domestic producers combined with monthly production data for the remainder.

— Ingrid Lexova

Flat steel shipments from service centers in the EU 27 plus the UK fell by 5.5% in the first two months of 2021, compared with the same period of last year, with stockholders’ distribution of multi-product and proximity steel — including long steel dropping by 4.8% during the same period, European steel stockholders and distributors association EUROMETAL said April 26.

In February, flat milled product shipments declined by 1.7% year on year, compared with a 9.2% drop for the month of January.

The February 2021 index of stock volumes dropped to 85 from 92 in February 2020. Expressed in days of shipments, stocks at EU service centers reached 63 days in February, compared with 66 days in February 2020.

In February, stockholders’ distribution of multi-product and proximity steel decreased 3.4% on the year.

The stock volumes index of EU 27 + UK multi-product and proximity steel stockholding distribution registered at 78 in February, down from 85 in the same month of last year. When expressed in days of shipments, stock volumes were at 66 days of shipments in February, compared with 70 days in February 2020.

— Annalisa Villa

The European Commission (EC) has decided to impose definitive anti-dumping duties of 4.7%-7.3% on imports of hot-rolled coil from Turkey.

According to an EC document dated April 23, major Turkish HRC producer Colakoglu is subject to the highest definitive duty of 7.3%, while Turkey’s largest integrated steel producer, Oyak Maden Metalurji Group (Erdemir and Isdemir), has a duty rate of 4.9%.

Habas has the lowest duty at 4.7%, while Borcelik and Agir Haddecilik will face a duty of 5.6%. All other Turkish companies will have a definitive duty of 7.3%.

“The Commission informed all interested parties of the essential facts and considerations on the basis of which it intended to impose a definitive anti-dumping duty on imports of certain hot-rolled flat products of iron, non-alloy or other alloy steel originating in Turkey,” the EC said, adding that all parties were granted a period within which they could make comments on the final disclosure.

The EC launched the investigation in mid-May 2020 following a request by European steelmakers group Eurofer. The EC then announced on Jan. 7, 2021 that it had imposed provisional anti-dumping duties of 4.8%-7.6%.

The EU is Turkey’s main HRC export market and the final duty decision could limit further Turkish mills’ exports, which were already negatively effected by EU trade barriers.

The EC is investigating to determine whether the current system of EU steel import safeguards should continue after its expiry on June 30.

Although Turkish steel producers suspended their countervailing duty reviews following the EC’s April 7 decision to officially terminate the CVD investigation on HRC imports from Turkey, the country may respond to the EU’s latest anti-dumping move with countermeasures.

Turkey officially started a dumping investigation against hot-rolled coil imports from the EU region and South Korea with a presidential decree published in the country’s official gazette Jan. 9.

— Cenk Can

European HRC prices were heard higher in the market April 26 as mills aim to reach the Eur1,000/mt level announced by ArcelorMittal, though players have said most prices that are discussed are purely theoretical, with further increases now said to be futile due to the limited availability of domestic steel, sources told S&P Global Platts.

According to one European mill source, Q3 orderbooks were heard to have been filled, with some customers now asking for Q4 allocations.

The mill source cited offers at Eur1,115/mt for HDG and said HRC was between Eur970-980/mt ex-works RUhr.

“It’s useless to announce another increase, the price is hiking up anyway,” the mill source said. “The fact is, when customer needs material, he will pay whatever.”

The market was watching the Chinese steel economy closely, as China is now importing more than it is exporting for its own home production.

“As long as China does not export, the world market will not have enough and [high] prices will remain.”

A German mill source said HRC prices were at Eur1,000/mt ex-works Ruhr minimum and were heard to be offering at Eur1,050/mt ex-works Ruhr.

Lead times were heard for September-October for HRC and as late as November-December for HDG.

“The third quarter will be the worst quarter, less material will come in and now end-users have recognized that there isn’t enough material and prices will not go down,” the mill source said. “If you don’t get material from local suppliers, you go to imports. People buying higher than domestic, but its a question availability.”

In the Italian market an Italy-based trader said buyers were having problems paying for steel, with credit limits not matching the rising prices in the market.

“Customers now having to pay cash in advance,” the trader said.

— Amanda Flint

En el siguiente enlace pueden acceder a la edición de Abril de nuestra revista:  INFOACERO ABRIL 2021

A continuación destacamos algunos de sus contenidos:

1. Opinión – D. Rafael González– Junta Directiva de  la UAHE. 
2. Evolución del Índice de Precios de Productos Siderúrgicos – UAHE
3. Formación UAHE: “Gestión del Riesgo de Crédito Comercial”, “Claves para abordar el Plan de Igualdad”
4. Nuevo Ciclo de Conferencias UAHE– “Perspectivas en el sector siderúrgico, la opinión de los expertos.”
5. Siderurgia: Perspectivas del Sector del Acero a corto plazo- WorldSteel Association.

At the end of February the EUROMETAL stock level indexes for both flats steel service centres and multi-product proximity distributors stood below last year’s level. Despite the high prices of steel products, there is still no sign of overstocking in the supply chain.

EU SSC at the end of February had on average stocks for 63 days of shipments, down 3 days compared with the end of February 2020, Kallanish notes.

For proximity and multi-product distributors the decline in stocks was even more accentuated. By the end of February stock volumes stood at the equivalent of 66 days of shipments, down 4 days compared with the same month in 2020.

Emanuele Norsa Italy

Pesmel Corporation become associate member of EUROMETAL as of May 2021.

Pesmel is a Finland based integrated solution provider of automated logistics, storing and packing systems for the metals, pulp and paper and tire manufacturing industries globally. Specialist in innovative material flow solutions, Pesmel helps industrial customers to rethink and renew their logistic chain. Their focus is on improving the efficiency of their customers’ material flows throughout. Over forty years in existence they today are the favoured partner for many leading industrial companies around the world.

Pesmel high-performance solution for metal industry is based on the unique Material Flow How® concept with following components:

• AS/RS complete with in-feed and out-feed systems
• Automated packing of coils and flat products complete with conveying logistics
• All control software inclusive of the WMS

Pesmel’s solutions require in-depth knowledge in material flow optimization, design, engineering, automation, machine building and software development. The combination of advanced software capabilities, inhouse engineering and material flow know-how sets Pesmel apart from its competitors.

Pesmel’s Material Flow How® concept interconnects, automates and streamlines material functions, enabling the plant to operate efficiently as one logistic entity. The high-performance systems are tailored, based on the customer’s processes and requirements.

With the Material Flow How® concept integrated to the production processes the customer can achieve total efficiency with shortened lead times, full traceability and accurate sorting and loading of products. The concepts not only optimize internal logistics but also make the external logistics chain more efficient.

pesmel.com

247TailorSteel, a strip processing centre group with operations in the Netherlands and Germany, is expanding its activities in Germany further, Kallanish has learned.

The new production facility will be built in Langenau between Stuttgart and Munich, and will initially have a capacity of 4 laser machines, 3 tube laser machines and 4 bending machines. The 15,000 m2 facility is to be built on a site of over 36,000 m2 and will eventually employ 200 people. Further machinery will be installed in phases in Langenau, bringing the total capacity up to 12 laser machines, 10 tube laser machines and 12 bending machines. Construction is scheduled to start in the second half of 2021; the factory will be fully operational in the autumn of 2022.

A few months ago, 247TailorSteel opened a new facility in Hilden close to Düsseldorf. That factory is now up and running, serving customers in North Rhine-Westphalia and the surrounding regions. Langenau will be the third German site of 247TailorSteel, which is based in Varsseveld in the Netherlands, with German sites in Oyten near Bremen, and the relatively new facility in Hilden. On a total working area of 36,000 m2, the company so far operates 37 laser cutting machines and 20 edging presses.

Christian Koehl Germany

French stainless producer Aperam has decreased May alloy surcharges for its austenitic range of flat stainless steels for Europe by €50/tonne ($60) on average compared to last month, Kallanish learns from the company.

The surcharge for grade 304 (1.4301) has gone down from €1,822/t in April to €1,777/t effective from 1 May. For grade 316 it has gone from €2,607/t in April to €2,520/t in May. Grade 309S, a heat-resistant stainless steel used in high-temperature applications, has decreased from €2,452/t in April to €2,388/t next month. The surcharge for the most popular ferritic grade, 409, has risen slightly however from €690/t to €698/t, the company reveals.

Nickel prices for cash buyers have been see-sawing in recent months. Offers for cash buyers were at $16,526/t on 23 March and reached $16,150/t on 23 April, Kallanish notes.

Natalia Capra France

Seaborne iron ore prices and Chinese scrap prices have both surged. Restocking drove iron ore to a new record high, while Chinese mills have also hiked their scrap purchasing prices.

The Kallanish KORE 62% Fe index increased $4.61/t to $186.19/dry metric tonne cfr Qingdao. The Kallanish KORE 65% Fe index gained $5.13/t to $219.72/dmt cfr, and the KORE 58% Fe index leapt $9.67/t to $164.17/dmt cfr. All were at record highs. A total of 170,000t of Brazilian Blend sold at $194.4/t with a laycan in 21-30 May.

On the Dalian Commodity Exchange, September iron ore settled up CNY 40/t from Friday at CNY 1,137/t ($175.07/t), while on the Singapore Exchange May 62% Fe futures settled up $6.47/t at $187.53/t. The same contract for 65% Fe and 58% Fe futures settled up $6.62/t at $222.50/t, and up $10.58/t at $167.08/t respectively.

Chinese scrap prices have also increased sharply. Variety 6mm+ heavy scrap delivered to mills in the Yangtze River Delta region hit CNY 3,532/t on Monday, up CNY 41/t from Friday. Almost every mill in the region, including Shagang, has increased its purchasing prices by CNY 30-50/t over since Friday. In Tangshan, billet prices were flat on Monday at CNY 4,980/t, after increasing CNY 30/t over the weekend. 

In the short term iron ore is being pushed higher by mill restocking ahead of the 1-5 May Labour Day holiday. Restrictions in Tangshan did little to interrupt this, as they only apply for two days. Chinese brokerage Horizon Insights meanwhile expects prics supported into May on the back of lower arrivals at ports. It says China’s iron ore market could be in deficit by 3.8 million tonnes in May, leading to a decline in port stocks.

Tomas Gutierrez UK