Year: 2026

The European longs market has remained “tense and static” this week, with producers’ attempts to raise prices, that continue to fail to appeal to buyers.

In the Italian rebar market, for example, producers have tried to increase price requests by between €30/mt and €50/mt depending on the mill, raising them to a range of €350-360/mt ex-works base (€610-620/mt ex-works including regular extras). However, according to sources, buyers continue to withdraw previous orders at €280-290/mt ex-works base (€540-550/mt ex-works including regular extras). However, volumes available at these prices “are now running out”, a source said. “Producers are worried,” another source commented. “This war [in the Middle East] is having a major influence, investments have collapsed, people are afraid to spend,” he concluded.

Italian producers have chosen to implement various strategies to cope with the high energy prices caused by the war and with demand at an all-time low. Several of them, in fact, have reduced or idled production for varying periods of time, from a few days to over a week, waiting to have a clearer picture of demand.

As far as the wire rod market in Italy is concerned, quotations are still suspended for now. “The situation is tense and demand is still very low. Hopefully local mills will not increase prices too much, otherwise the little demand there is risks disappearing completely,” a market player stated. “Demand remains low,” another source confirmed. “Just as the conflict in Iran has generated increases in energy – and therefore steel – prices, it is now also stopping demand. Unlike 2022 [post-Covid and war in Ukraine], when the market reacted by holding prices, there is now a lot of uncertainty. The market is not responding,” he concluded.

In other European countries, wire rod offers are also temporarily suspended, and a large manufacturer is renegotiating current orders with some customers. As far as rebar is concerned, prices for central Europe are now standing at €580-590/mt ex-works.

Export markets remain silent, while imports from Turkey have recorded some hike attempts due to the influence of freight costs, which are strongly affecting deliveries by vessel. “In addition to the increase in freight costs, deliveries are being delayed by three to four months,” a European trader commented. “Ships are simply impossible to find,” said another.

Import prices from Turkey to southern Europe this week are reported to be standing at around €530/mt CFR for rebar, up by €10-30/mt week on week, while for wire rod they have been reported at around €540/mt CFR, also up by the same range week on week.

€1 = $1.15 (European Central Bank, March 12)

Spanish steel association Unesid has expressed concern about the recent rise in energy costs in Europe and its impact on the competitiveness of the industry, Kallanish notes.

The organisation points out that energy markets have been marked by high volatility in recent days, driven by the current international geopolitical context.

“We are confident that the European Council will adopt measures aimed at mitigating the impact of high energy prices on EU industry at its next meeting on 19 and 20 March,” Unesid states. At the same time, it hopes the Spanish government will promote structural measures to guarantee electro-intensive industries stable access to energy at competitive costs, in line with the policies implemented by other European countries.

Unesid is also concerned about developments in the international geopolitical situation and the possible impact on world trade. Spanish steelmakers stress the importance of preserving the normal functioning of strategic maritime routes, especially transit through the Strait of Hormuz, considered a key route for the global transport of energy and raw materials.

“Any prolonged disruption to this route could cause disruptions in global supply chains, with potential consequences for numerous industrial sectors, including the steel value chain,” Unesid concludes.

 

Antonio Gozzi, president of Federacciai, is calling for a temporary suspension of the Emissions Trading System (ETS) in Italy where electricity prices are strongly linked to gas costs. This could reduce power prices by around €25/MWh ($29.10/t) while awaiting a broader revision of the mechanism at EU level.

Speaking at a recent energy transition event in Rimini, Gozzi said the EU ETS has gradually evolved beyond a decarbonisation instrument into what he describes as a carbon tax exposed to financial markets.

Amid global uncertainty and rising energy prices for European companies, the impact of the system should be considered carefully.

“No one can accuse the Italian steel industry of being opposed to the energy transition: already today we are among the most decarbonised production systems in the world, with around 85% of steel produced through electric arc furnaces. But decarbonisation must not turn into industrial desertification,” Gozzi warned.

Meanwhile, the proposal for the Industrial Accelerator Act presented by the European Commission represents another missed opportunity to boost the competitiveness of the European steel industry, he added.

The absence of “Made in Europe” criteria for steel is concerning. The Commission believes the steel sector will benefit sufficiently from the new trade regime to be implemented from July. However, this is made to address global overcapacity and cannot replace specific measures to support European production.

“On the issue of ferrous scrap, a strategic resource for circularity and the green transition, the final text has also been weakened. Measures included in earlier drafts aimed at promoting the use of secondary raw materials in Europe and strengthening the monitoring of scrap exports have been removed,” Gozzi states in a note obtained by Kallanish.

Uncertainty also remains regarding the classification of low-emission steel. The Commission has decided not to regulate the voluntary “green” steel label directly and it does not clearly define the methodology to be adopted.

“We reiterate that any criteria must be based exclusively on the actual product carbon footprint, avoiding mechanisms such as the scrap sliding scale, which would unfairly penalise electric arc furnace production, among the greenest and most circular steelmaking routes,” he concludes.

 

Uncertainty surges in global longs market due to war in Middle East

Due the war in the Middle East, levels of uncertainty have surged in the global long steel products market. Energy prices are flying high, supply chains have been disrupted, bunker oil and freight rates are up and stocks are down. It is too early to predict the overall impact of the war. While concerns regarding deliveries of cargoes originating from regions in the East have helped push prices up in the Western markets, demand is not improving, which comes as no surprise especially when we have no clue about how long this war will continue or to what extent it might spread. Another major question is what will happen to scrap prices.

Investments to be put on hold, no panic purchases despite EU mills’ price hikes

Investments will be put on hold given the high levels of uncertainty all around. EU mills have reacted with price increases but, as the market is still waking up after the winter season, this has not resulted in panic purchases.

Imports into EU risky amid lack of regulatory clarity

Brussels’ incompetence or unwillingness to announce final CBAM regulations and how safeguard measures will be continued after June 2026 makes imports into the EU extremely risky.

Turkish mills face slow local and export demand, adjust capacity usage accordingly

In Turkey, construction activity is slow and exports are down by 20 percent compared to the same period last year. Mills are adjusting their production based on the demand they receive.

US Supreme Court gives some breathing space to importers, but new tariffs likely

The Supreme Court decision in the US against Trump’s tariffs gives a partial breather to importers. However, it will probably not be long before new tariffs will be implemented under different names.

Current market status unstable, outlook unpredictable

It is very difficult to talk about competition under the current levels of protectionism, geopolitical issues and uncertainty in the market. Under the current overall market circumstances, the current status of the market can be described as unstable with an unpredictable and unstable outlook.

irepas.com

ArcelorMittal Belgium has announced that preparations are nearing completion for the restart of the Galva 5 galvanizing line at its Flémalle facility after several years of inactivity.

According to the company, the line is expected to resume operations in the second quarter of 2026. Once restarted, hot rolled steel coils produced at ArcelorMittal’s Ghent plant will again be processed through galvanizing operations at the Flémalle site.

Modernization works carried out ahead of relaunch

Following the acquisition of the galvanizing line in July 2025, ArcelorMittal launched a comprehensive recovery and modernization program to prepare the facility for renewed production.

The works included roof renovation, dismantling and refurbishment of the zinc bath, and maintenance activities covering the strip feeding system and coil unwinding equipment. In addition, the company upgraded the plant’s digital infrastructure as part of broader modernization efforts aimed at improving operational performance.

Once operational, the Galva 5 line will restore an important processing capability within ArcelorMittal Belgium’s production network.

Author: SteelOrbis Editorial Team

steelorbis.com

European Union member states are expected to call on the European Commission to propose reforms to the bloc’s carbon market by July 2026, according to draft conclusions prepared for an upcoming summit of EU leaders seen by Reuters.

At the European Council meeting scheduled for March 19, governments will request a review of the EU Emissions Trading System (ETS) aimed at reducing carbon price volatility and limiting its impact on electricity prices.

Focus on stabilizing carbon prices

The draft text indicates that the European Commission should present proposals designed to stabilize the carbon market while maintaining the system’s central role in supporting the EU’s energy transition. The EU ETS functions by setting a cap on greenhouse gas emissions and allowing companies to buy and sell emission allowances within that limit.

Despite its central role in EU climate policy, the carbon market has faced increasing political pressure from some member states concerned about its impact on energy prices. Countries including Slovakia and the Czech Republic have argued that rising carbon prices are contributing to higher electricity costs and have called for measures ranging from market reforms to a potential suspension of the system.

Commission expected to present review in 2026

The European Commission has previously indicated that it plans to present proposals to review the ETS during the third quarter of 2026, although an exact timetable has not yet been confirmed.

The planned review is expected to focus on balancing the EU’s climate objectives with concerns over industrial competitiveness and energy affordability across the bloc.

Author: SteelOrbis Editorial Team

steelorbis.com

European hot rolled coil (HRC) prices have recorded another increase over the past week, with mills continuing to lift their offer levels across the region. However, the market response has remained muted as demand conditions have stayed weak and many buyers have refrained from making firm commitments. Most customers are reported to be placing bids below the €700/mt ex-works level, highlighting the gap between producers’ higher target prices and the purchasing appetite of the market. Meanwhile, market activity in the import segment has remained very slow with only a few offers reported this week.

While offers from leading EU HRC producer ArcelorMittal have been kept at €750/mt delivered or €730/mt ex-works, most local HRC prices from mills in northern Europe, mainly for May delivery, have been estimated at €700-710/mt ex-works, against €685-705/mt ex-works last week. At the same time, according to sources, although trade activity has improved to some extent, customers have been insisting on prices below €700/mt. Thus, the tradable price levels have settled at €685-700/mt ex-works, versus €670-700/mt ex-works last week.

In Italy, offers from mills are estimated at €685/mt ex-works for April delivery, up by €5/mt week on week, and at around €700/mt ex-works for delivery in May, the same as last week. Meanwhile, the tradable price level is estimated at €680-690/mt ex-works, up by €10/mt week on week.

In the meantime, volatility in energy markets has significantly dampened trading activity, with market participants pointing to sharp and unpredictable price movements that have left many buyers reluctant to commit to new deals. Traders note that the war in the Middle East has increased uncertainty across global markets, shifting trading behaviour toward speculation rather than demand-driven transactions. The conflict has also had a noticeable impact on Europe’s energy sector. Gas prices surged significantly in early March and, because steel production and related processes such as hot rolling are highly energy-intensive, higher gas prices are expected to raise operating costs for European mills.

The import market has continued to show little activity, as only a limited number of fresh offers were reported by industry sources. Indicative offer prices for HRC have remained at €525-600/mt CFR, with the lower end of the range corresponding to ex-India HRC offers. Offers for ex-Turkey HRC have been voiced at around €600/mt CFR, duty paid, but excluding CBAM costs, compared to around €560/mt CFR last week. Besides, some offers for ex-Algeria HRC were reported earlier this week at around €620/mt CFR, excluding CBAM, but, according one source, “They aim to increase their offer to $700/mt FOB, which translates to around €605/mt CFR, so offers at the €620/mt CFR level roughly make sense.”

Notably, market sentiment has been dampened by uncertainty regarding the EU’s updated safeguard measures and the allocation of national quotas. In addition, the lack of clarity over the cost implications of CBAM has prompted many buyers to take a wait-and-see approach. Besides, shipping disruptions have added another layer of difficulty. Security concerns in the Middle East have forced numerous vessels transporting goods from Asia to Europe to reroute around southern Africa via the Cape of Good Hope. The longer route has increased transit times by around two weeks, tightening the availability of material for prompt delivery.

$1 = €0.87

 

European domestic flat steel prices rose further in the week to Thursday March 12, with production costs raised following the breakout of new conflict in the Middle East and persistent import limitations affecting the market, trade sources said.

Following the start of the US-Israel-Iran conflict last month, the situation has escalated across the region, affecting trade routes and logistics, while also causing energy price spikes in Europe and higher costs for raw materials, Fastmarkets heard.

Market sources said that speculative demand had picked up because of changing geopolitical dynamics, adding that consumption levels in the European market remained low.

But while producers were increasing prices as a result of growing interest in domestic products, to avoid risks linked to imported materials, it was still unclear whether demand was strong enough to absorb all the increases, market sources said.

Meanwhile, mills were heard to be comfortably booked, and in no rush to place new orders.

Domestic
In Northern Europe, domestic prices for cold-rolled coil and hot-dipped galvanized coil increased in the week to Wednesday.

Fastmarkets’ weekly price assessment for steel cold-rolled coil, domestic, exw Northern Europe, was €790-830 ($912-958) per tonne on March 11, rising from €785-790 per tonne the week before.

Meanwhile, the weekly price assessment for steel hot-dipped galvanized coil, domestic, exw Northern Europe, was €790-830 per tonne, widening from €795-800 per tonne in the previous assessment.

The new assessment matched higher estimates of workable levels reported by market sources.

In Southern Europe, domestic CRC and HDG prices were mostly unchanged.

Fastmarkets’ weekly price assessment for steel CRC, domestic, exw Southern Europe, was €805-820 per tonne on Wednesday, widening upward from €805-810 per tonne in the previous week.

The new upper end of the range was attributed to offers heard at €820 per tonne ex-works.

The weekly price assessment for steel HDG, domestic, exw Southern Europe, was stable at €785-790 per tonne on Wednesday.

Imports
Meanwhile, imported prices for these products were unchanged on Wednesday, with no new trading reported during the assessment week.

Import activity was limited following the introduction of the EU’s Carbon Border Adjustment Mechanism (CBAM) earlier this year and other trade regulations still affecting buyers’ appetite for imported coil, Fastmarkets understands.

The weekly price assessment for steel CRC, import, cfr main port Northern Europe, was stable at €630-660 per tonne, while the assessment for steel CRC, import, ddp Northern Europe, stayed at €730-770 per tonne.

Fastmarkets’ weekly price assessment for steel HDG import, cfr main port Northern Europe, was stable at €650-700 per tonne, while the assessment for steel HDG import, ddp Northern Europe, held at €760-770 per tonne.

The weekly price assessment for steel CRC, import, cfr main port Southern Europe, was stable at €620-650 per tonne, while the weekly price assessment for steel CRC, import, ddp Southern Europe, was €730-780 per tonne, also unchanged.

Fastmarkets’ weekly price assessment for steel HDG, import, cfr main port Southern Europe, was stable at €660-700 per tonne, while the weekly price assessment for steel HDG, import, ddp Southern Europe, was also stable at €750-770 per tonne.

 

Rebar suppliers in Europe returned to the market with higher prices during the week to Wednesday March 11, after withdrawing last week following the effects of the US-Iran conflict.

Higher energy and fuel costs forced suppliers to increase rebar prices for domestic customers, while competition from imports weakened further because of rising freight costs and longer freight times.

Suppliers in Germany increased offers by €10-30 ($11.56-34.70) per tonne over the week, with new offers starting at €650 per tonne delivered for 8-32 mm rebar.

In France, similar material was heard at €630-640 per tonne delivered.

In Austria, workable prices were also estimated at €630 per tonne delivered.

Fastmarkets’ weekly price assessment for steel reinforcing bar (rebar) domestic, delivered Northern Europe was at €630-650 per tonne on Wednesday, up €10-20 from €610-640 per tonne on March 4.

Market sources reported that suppliers were offering limited tonnages with short validity periods amid the fast-changing situation in the energy sector.

At the same time, demand remained moderate, with expectations of improving construction activity because of the start of the spring.

In Southern Europe, mills followed a similar policy, with higher price levels heard in Italy and Spain.

Mills in Italy increased offers for 8-40 mm bar to €620-640 per tonne ex-works, but buyers were said to be cautious with “few requests coming in.” Workable prices were estimated at €600-620 per tonne delivered, but again with very short validity.

“Customers are disoriented. They remember what happened at the beginning of Russia’s invasion of Ukraine with the fast price uptrend and costs out of control, but at the same time they’re afraid that a rapid end to the US-Iran conflict will bring a new decrease. Someone is buying, [while] some others are in wait-and-see mode, [but] no one is optimistic regarding the near future,” an Italian trading source said.

“I can understand customer caution, but believe me, the fear among producers in selling at prices that are not sustainable with higher costs is very high. Consider also the psychological aspect for old-economy producers: we have always had scrap prices and availability as our benchmark, so we have difficulty understanding the hyper-speculative attitude of energy suppliers,” an Italian producer said on Wednesday.

“Even as I write, we are stopping production three to four hours a day to avoid peak energy costs and this is obviously lowering our stocks, so we are not under pressure to sell volumes. We need to get ahead of the cost curve as quickly as possible,” he added.

Fastmarkets’ weekly price assessment for steel reinforcing bar (rebar) domestic, ex-works Italy rose to €600-640 per tonne on Wednesday, up €20-50 from €550-620 per tonne on March 4.

Spanish suppliers also raised offers, with new levels at €675-690 per tonne delivered.

Sources noted that unlike in other parts of Europe, demand for rebar in Spain has been strong because of healthy economic performance and more favorable weather conditions.

Fastmarkets’ weekly price assessment for steel reinforcing bar (rebar) domestic, delivered Spain was €675-690 per tonne on Wednesday, up €10 from €665-680 per tonne on March 4.

 

European hot-rolled coil prices climbed higher as suppliers limited offered tonnages in the rising markets, sources told Fastmarkets on Thursday March 12. Positive sentiment, supported by a shortage of imports, continued to dominate the European flat steel market.

European producers were said to be limiting offered tonnage to the market in order to not “overcommit” and to retain flexibility should prices continue to rise.

Offers for May delivery coil were reported at €710-750 ($823-870) per tonne based delivered (around €690-735 per tonne ex-works) from integrated suppliers in Northern Europe during the week beginning Monday March 9.

Italy-origin coil was heard offered to Italy at €720-730 per tonne base delivered, but with limited volumes.

Transactions for limited tonnages of HRC were heard done at €710-720 per tonne ex-works during the week, in Germany and the Benelux area.

Some buyers stepped back from the market, digesting the price rally.

“We are not booking at these levels [above €700 per tonne ex-works]. Last deals we did for a few thousand tonnes were around €700 [per tonne ex-works],” a buyer in Germany said.

Estimations of achievable prices were largely coming in the range of €700-710 per tonne ex-works form industry stakeholders.

As a result, Fastmarkets’ daily steel hot-rolled coil index domestic, exw Northern Europe was calculated at €707.19 per tonne on March 12, up by €1.21 per tonne from €705.98 on March 11.

The index was up by €6.56 per tonne week on week and by €52.19 per tonne month on month.

After the index was published, a deal was also reported at €730 per tonne ex-works, but it was not widely confirmed by the market so far.

Meanwhile, in Southern Europe, Fastmarkets calculated its daily steel hot-rolled coil index domestic, exw Italy at €692.50 per tonne ex-works on March 12, up by €3.75 per tonne from €688.75 per tonne on March 11.

The index was up by €12.50 per tonne week on week and by €41.50 per tonne month on month.

A local integrated mill was maintaining offers at €710-720 per tonne base delivered [around  €695-705 per tonne ex-works] with limited flexibility for discounts, sources said.

Offers from re-rollers were heard at €700 per tonne ex-works.

Buyers estimated the market levels at €680-690 per tonne ex-works.

In the secondary market in the week commencing March 9, some steel service centers (SSCs) claimed to have achieved €800 per tonne CPT for 4 mm S235 grade HR sheet, indicating improved buying activity. Other sources reported that achievable prices were still hovering around €750-770 per tonne CPT, but buyers were showing more acceptance of higher prices.

“We have much more inquiries this week, some SSC are pushing [HR sheet] offers above €800 per tonne CPT to reflect higher HRC costs,” a buyer source in Italy told Fastmarkets.

Concerns over reduced import availability in the second half of the year due to new safeguards and Carbon Border Adjustment Mechanism (CBAM) effects were fuelling the upward sentiment.

New offers were scarce on both a DDP and a CFR basis, reflecting growing concerns about quota availability and CBAM costs for imports.

“Many sellers withdrew DDP-based [CBAM-accounted] HRC offers from the market, reassessing the calculation,” a second buyer in Italy said.

The first CBAM Certificate price will be published on April 7, the European Commission reported.

HRC offers from Turkey were reported at €565-570 per tonne CFR, including anti-dumping duty.

An Algerian supplier reportedly withdrew offers after securing some tonnages at €520 per tonne CFR earlier in March. Sources expected new offers to be “at least €30 per tonne higher.”